Entryway Shoe Bench
€12,00
Entryway Shoe Bench
€12,00
A plain, square bench for the front door: a seat of 2x4 slats on plywood end panels, a slatted shelf under it. Step 1 picks your length and build.
An original Square & Furrow plan: designed for today's homes, every step drawn, cut list for standard lumber, imperial and metric.
At a glance
- Size: S 35 1/2" (902 mm) or L 47 1/2" (1207 mm) long, 16" (406 mm) deep, seat 17 5/8" (448 mm); 250 lb (113 kg) a place: S 2 adults, L 2 comfortably, 3 snugly
- Skill: Beginner
- Build time: Two weekends: a day to finish and dry the parts, a day to build; the load test after 30 days
- Materials: approx. US$120–200
- In the plan: 14-page PDF, US Letter, 13 illustrated steps, imperial, with metric in the lists and steps
Inside the 14-page plan
- An exploded drawing that shows how every part goes together
- Dimensioned views of the finished build, in feet and inches
- Materials list and hardware schedule, with standard lumber sizes and metric equivalents
- Cut list for standard lumber, so you can cut everything before you start assembling
- Clear illustrated step-by-step assembly drawings: one job per step, every part drawn, fastener positions marked
Safety: Never stand on it: it is a seat, not a step stool. One adult up to 250 lb (113 kg) a seat place: S 2 places, L 3 places (2 comfortably). Shelf 40 lb (18 kg). No jumping. Worked to NDS-style values, not tested to failure. The static test (step 13) checks YOUR bench's joints and build at 1.5 x one place: do it after the full cure, before anyone sits on it.
The PDF plan is a digital download; nothing ships. An original design by Square & Furrow, produced with AI-assisted tools and checked by our build model.
Illustrated step by step
Imperial + metric
Cut list & checklist
Instant PDF download
Built to work
Entryway Shoe Bench
Built in home workshops more than a century ago, and redrawn for the way you build today.
RenderingStep by step
Every part drawn. Every fastener marked.
Each step is one job with its own clear drawing: the parts it adds are shaded, every nail and screw position is marked, and the hardware and tools sit right beside it. An exploded view shows how the whole build goes together before you make a single cut.
Before you build
Your tools & materials checklist
Tick what you already have. Whatever is left is your shopping list. Your ticks are saved on this device, so you can come back to it from the lumber yard.
0 of 0 on hand
Tools
Materials
One bench, either length. A 2x4 is 1 1/2 × 3 1/2", a 2x2 1 1/2" square, a 1x3 3/4 × 2 1/2"; buy straight, flat boards. Plywood sold as 3/4" is 23/32" (18 mm): the plan is worked at 3/4". Cutting layout: Fig. 2.
Questions about this plan
What are the finished dimensions?
S 35 1/2" (902 mm) or L 47 1/2" (1207 mm) long, 16" (406 mm) deep, seat 17 5/8" (448 mm); 250 lb (113 kg) a place: S 2 adults, L 2 comfortably, 3 snugly. The drawings are dimensioned in feet and inches; the materials list, cut list and steps give metric sizes alongside.
What skill level do I need, and how long does it take?
It's rated beginner. Expected build time: Two weekends: a day to finish and dry the parts, a day to build; the load test after 30 days. Each step names the tools it uses, so it's written for first-time builders.
How much does it cost to build?
Roughly US$120–200 in materials at typical US lumber-yard prices. Prices vary a lot by region, so price the materials list at your local yard before you start.
What tools do I need?
Pencil; Speed square, 12" (305 mm); Steel rule, 12" (305 mm) (the load test's gauge); String, 8 ft (2.4 m) (the load test's gauge); Masking or painter's tape (the depth flag on the bit); Circular saw with a clamped straightedge guide, or a handsaw; Sawhorses or scrap lumber to cut over; Sanding block; Sandpaper 180 and 220 grit; Foam brush or lint-free rags; Wood filler; Drill/driver with a nose 1 3/4" (44 mm) or less across, 1/8" (3 mm), 11/64" (4.5 mm) and 3/16" (5 mm) bits, a countersink bit and a #2 cross-head bit; 2 bar clamps, 36" (914 mm) (S) or 48" (1219 mm) (L), throat 2 1/2" (64 mm) or more; 2 small clamps; A helper to lift the frame; Scrap: five 6" (152 mm) blocks, 2x2 bearers, spacers 1/2" (13 mm) and 3/4" (19 mm) (S) or 15/16" (24 mm) (L), fifteen 25 lb (11 kg) sacks of sand, rice or flour for the load test; plus a tape, pencil, safety glasses, hearing protection and gloves. The interactive checklist on this page lets you tick off what you already own.
Where does this plan come from?
It is an original Square & Furrow design for today's homes, produced with AI-assisted tools and checked by our build model. You get a materials list, metric sizes, a cut list for standard lumber and clear illustrated step-by-step assembly drawings, every part drawn. Sizes are in feet and inches, with metric alongside.
Can a beginner follow it?
Yes. Each step is a single job with its own drawing: the parts that step adds are shaded, the nails, screws and bolts it drives are marked where they go, and the hardware for that step is listed beside it. An exploded drawing at the front shows how the whole build goes together before you cut anything.
What do I get?
A 14-page print-ready PDF (US Letter) to download after purchase. It prints well at home or at a copy shop, and reads fine on a tablet in the workshop.