Fragrance Display Riser
€12,00
Fragrance Display Riser
€12,00
Cost: about US $73-141 new by size, about US $41-92 with the finish and supplies on hand (each size costed line by line inside the plan). Built to fit your bottles, with stated ratings.
An original Square & Furrow plan: designed for today's homes, every step drawn, cut list for standard lumber, imperial and metric.
At a glance
- Size: 12 | 18 | 24" (305 | 457 | 610 mm) wide; DEEP 3 steps 13 1/2 x 7 3/8" (343 x 187 mm) or SHALLOW 4 steps 13 3/4 x 9 3/8" (349 x 238 mm), the 12" SHALLOW 8 5/8" (219 mm) high; 4 | 6 | 9 lb a step
- Skill: Beginner
- Build time: Two work sessions a few days apart (the finish dries 3 days between), then 7 days before use
- Materials: approx. US$73–141
- In the plan: 13-page PDF, US Letter, 12 illustrated steps, imperial, with metric in the lists and steps
Inside the 13-page plan
- An exploded drawing that shows how every part goes together
- Dimensioned views of the finished build, in feet and inches
- Materials list and hardware schedule, with standard lumber sizes and metric equivalents
- Cut list for standard lumber, so you can cut everything before you start assembling
- Clear illustrated step-by-step assembly drawings: one job per step, every part drawn, fastener positions marked
Safety: Rated 4 | 6 | 9 lb (1.8 | 2.7 | 4.1 kg) a step for 12 | 18 | 24" wide. Not anchored: empty, it tips when pulled at the top with about 3.4 lb (1.5 kg) sideways or 4.5 lb (2.0 kg) forward. The lip stops sliding, not a knocked-over bottle: tall bottles at the back. Perfume burns: no candles near it. Move it empty. Tested at 7 days (step 11).
The PDF plan is a digital download; nothing ships. An original design by Square & Furrow, produced with AI-assisted tools and checked by our build model.
Illustrated step by step
Imperial + metric
Cut list & checklist
Instant PDF download
Built to work
Fragrance Display Riser
Built in home workshops more than a century ago, and redrawn for the way you build today.
RenderingStep by step
Every part drawn. Every fastener marked.
Each step is one job with its own clear drawing: the parts it adds are shaded, every nail and screw position is marked, and the hardware and tools sit right beside it. An exploded view shows how the whole build goes together before you make a single cut.
Before you build
Your tools & materials checklist
Tick what you already have. Whatever is left is your shopping list. Your ticks are saved on this device, so you can come back to it from the lumber yard.
0 of 0 on hand
Tools
Materials
One riser, any size; buy flat, straight boards (sight along them). Cutting layout: Fig. 2. Work safely. Clamp what you saw and drill; glasses and a dust mask; finish outdoors or by an open window, gloves on; let used foam brushes dry flat outdoors before the trash.
Questions about this plan
What are the finished dimensions?
12 / 18 / 24" (305 / 457 / 610 mm) wide; DEEP 3 steps 13 1/2 x 7 3/8" (343 x 187 mm) or SHALLOW 4 steps 13 3/4 x 9 3/8" (349 x 238 mm), the 12" SHALLOW 8 5/8" (219 mm) high; 4 / 6 / 9 lb a step. The drawings are dimensioned in feet and inches; the materials list, cut list and steps give metric sizes alongside.
What skill level do I need, and how long does it take?
It's rated beginner. Expected build time: Two work sessions a few days apart (the finish dries 3 days between), then 7 days before use. Each step names the tools it uses, so it's written for first-time builders.
How much does it cost to build?
Roughly US$73–141 in materials at typical US lumber-yard prices. Prices vary a lot by region, so price the materials list at your local yard before you start.
What tools do I need?
Tape measure or ruler (the bottles, front to back with the cap); Pencil; Speed square; Low-tack (delicate-surface) painter's tape (the depth flag, the bundle, the back); Kitchen scale; rice or dry beans in 1 lb (0.5 kg) zip bags: 6, 9 or 14 for the 12, 18 or 24" riser (the weighed proof load, step 11); A bottle cap and a few drops of your perfume (the finish test); Handsaw against a clamped square, or a circular saw (the boards to length; the 12" SHALLOW's back ripped to 8 1/2"); Handsaw (the end panels' steps: a rip and a crosscut each, both panels at once); A stop block (the risers and steps, one length); Flush-cut saw (the plugs); Sawhorses or scrap lumber to cut over; Sanding block; Sandpaper 120, 180 and 220 grit; Foam brushes; Drill/driver; a 3/8" (10 mm) brad-point bit with a stop collar (counterbores 1/4" deep); a 3/16" (5 mm) bit; a 7/64" (2.8 mm) bit 6" (152 mm) long (every pilot); a #2 cross-head bit; 2 clamps, 3" (76 mm) opening or more; Wood glue (the plugs only); Bought with the wood: #8 x 2 1/2" (64 mm) coated flat-head wood screws, a 1 lb box (40 or 50 used); 3/8" (10 mm) face-grain plugs (50 or 100); four clear self-adhesive bumpers 1/2" (13 mm) across, 1/8" (3 mm) tall; oil-based polyurethane, satin, a quart; A scrap board to drill into; plus a tape, pencil, safety glasses, hearing protection and gloves. The interactive checklist on this page lets you tick off what you already own.
Where does this plan come from?
It is an original Square & Furrow design for today's homes, produced with AI-assisted tools and checked by our build model. You get a materials list, metric sizes, a cut list for standard lumber and clear illustrated step-by-step assembly drawings, every part drawn. Sizes are in feet and inches, with metric alongside.
Can a beginner follow it?
Yes. Each step is a single job with its own drawing: the parts that step adds are shaded, the nails, screws and bolts it drives are marked where they go, and the hardware for that step is listed beside it. An exploded drawing at the front shows how the whole build goes together before you cut anything.
What do I get?
A 13-page print-ready PDF (US Letter) to download after purchase. It prints well at home or at a copy shop, and reads fine on a tablet in the workshop.