Slim Stackable Shoe Rack
€12,00
Slim Stackable Shoe Rack
€12,00
Build one unit now; a second pins on top later. Step 1 picks your size.
An original Square & Furrow plan: designed for today's homes, every step drawn, cut list for standard lumber, imperial and metric.
At a glance
- Size: 20, 27 or 34" (508, 686 or 864 mm) wide, 12" (305 mm) deep. Rated 15, 20 or 25 lb (7, 9 or 11 kg) a tier
- Skill: Beginner
- Build time: One weekend: a day to build, a day to finish
- Materials: approx. US$70–110
- In the plan: 13-page PDF, US Letter, 12 illustrated steps, imperial, with metric in the lists and steps
Inside the 13-page plan
- An exploded drawing that shows how every part goes together
- Dimensioned views of the finished build, in feet and inches
- Materials list and hardware schedule, with standard lumber sizes and metric equivalents
- Cut list for standard lumber, so you can cut everything before you start assembling
- Clear illustrated step-by-step assembly drawings: one job per step, every part drawn, fastener positions marked
Safety: Never climb it, sit on it or hang on it. Rated 15, 20 or 25 lb (7, 9 or 11 kg) a tier. Every stack and every unit 18" (460 mm) tall or taller MUST be tied to a wall stud (steps 10 and 11), as must any unit children or climbing pets can reach: it guards against tipping under a child of about 50 lb (23 kg), never a climbing rating.
The PDF plan is a digital download; nothing ships. An original design by Square & Furrow, produced with AI-assisted tools and checked by our build model.
Illustrated step by step
Imperial + metric
Cut list & checklist
Instant PDF download
Built to work
Slim Stackable Shoe Rack
Built in home workshops more than a century ago, and redrawn for the way you build today.
RenderingStep by step
Every part drawn. Every fastener marked.
Each step is one job with its own clear drawing: the parts it adds are shaded, every nail and screw position is marked, and the hardware and tools sit right beside it. An exploded view shows how the whole build goes together before you make a single cut.
Before you build
Your tools & materials checklist
Tick what you already have. Whatever is left is your shopping list. Your ticks are saved on this device, so you can come back to it from the lumber yard.
0 of 0 on hand
Tools
Materials
Boards for the middle width, two tiers of flats; the other sizes: SIZES AND RATINGS. A 1x12 is 11 1/4" wide, a 1x3 2 1/2", a 1x4 3 1/2". Buy straight, flat boards. Cutting layout: Fig. 2.
Questions about this plan
What are the finished dimensions?
20, 27 or 34" (508, 686 or 864 mm) wide, 12" (305 mm) deep. Rated 15, 20 or 25 lb (7, 9 or 11 kg) a tier. The drawings are dimensioned in feet and inches; the materials list, cut list and steps give metric sizes alongside.
What skill level do I need, and how long does it take?
It's rated beginner. Expected build time: One weekend: a day to build, a day to finish. Each step names the tools it uses, so it's written for first-time builders.
How much does it cost to build?
Roughly US$70–110 in materials at typical US lumber-yard prices. Prices vary a lot by region, so price the materials list at your local yard before you start.
What tools do I need?
Steel rule (the load test's gauge); Pencil; Combination square; 12" (300 mm) speed square; Level, 2 ft (0.6 m); Stud finder with AC (wire) detection; Hook scale (luggage or fish scale), 50 lb (25 kg) range (the anchor's pull test); Circular saw with a clamped straightedge guide, or a handsaw; Sanding block; Sandpaper 80, 120, 180 and 220 grit; Scissors; Foam brush; Lint-free rags; Drill/driver with 1/8" (and one 4" (100 mm) long), 1/4" brad-point and 3/8" (3, 6 and 10 mm) bits, a countersink bit and a 3" (75 mm) bit extension; Screwdriver, #2 Phillips; Hammer or mallet; Lighter (to seal the cord's ends); 2 bar clamps, 36" (915 mm) opening, throat 2 1/2" (64 mm) or more; 2 C-clamps, 4" (100 mm) opening; Glue brush; Masking tape (the depth flag on the bit); Scrap: a 3/8" (10 mm) spacer, a 2x4 guide block, a 2" (51 mm) standoff block, four finishing blocks, three, four or five 5 lb (2.3 kg) sacks of rice for the load test; plus a tape, pencil, safety glasses, hearing protection and gloves. The interactive checklist on this page lets you tick off what you already own.
Where does this plan come from?
It is an original Square & Furrow design for today's homes, produced with AI-assisted tools and checked by our build model. You get a materials list, metric sizes, a cut list for standard lumber and clear illustrated step-by-step assembly drawings, every part drawn. Sizes are in feet and inches, with metric alongside.
Can a beginner follow it?
Yes. Each step is a single job with its own drawing: the parts that step adds are shaded, the nails, screws and bolts it drives are marked where they go, and the hardware for that step is listed beside it. An exploded drawing at the front shows how the whole build goes together before you cut anything.
What do I get?
A 13-page print-ready PDF (US Letter) to download after purchase. It prints well at home or at a copy shop, and reads fine on a tablet in the workshop.